3-D Coculture of Hepatic Sinusoidal Cells with Primary Hepatocytes—Design of an Organotypical Model

doi:10.1006/excr.1996.0222

Experimental Cell Research

Volume 226, Issue 1, 10 July 1996, Pages 223-233

https://doi.org/10.1006/excr.1996.0222 Get rights and content

Abstract

Models for cocultures of parenchymal (PC) and nonparenchymal cells (NPC) of the liver relied on mixing the cells in a two-dimensional configuration or on establishing spheroidal aggregates.In vivohepatic nonparenchymal cells, such as endothelial cells and Kupffer cells, are separated from parenchymal cells by extracellular matrix (ECM). Due to their location outside of the space of Disse they can form a barrier toward the sinusoid. Hepatocytes are attached to ECM of the space of Disse via two opposing sinusoidal surfaces. No three-dimensional coculture model reflecting this specific microenvironment of the liver cell platesin vivohas been available to date. We designed a three-dimensional model by positioning NPC on top of PC enclosed as a monolayer within a collagen sandwich. A gas-permeable membrane support can be used to allow the supply of oxygen to the resulting cell plate also from underneath the cell layers. Morphological analysis was performed by inverse and cross-sectional studies by light microscopy, scanning, and transmission electron microscopy of the coculture model. Cuboidal hepatocytes formed confluent layers below the NPC layer. They regularly expressed bile canaliculi at intercellular contact zones. Both sinusoidal surfaces expressed microprojections. Characteristic NPC including endothelial cells, Kupffer cells, and Ito cells completely covered the second matrix layer within a week. Kupffer cells were located on top of endothelial cells. Ito cells were intermingled and could be identified by their intracytoplasmic lipid droplets. LPS stimulation of cocultures resulted in a depression of albumin secretion. Phase I and phase II metabolites of the cytochrome P-450 1A1 substrate ethoxyresorufin were generated independently from the presence of cocultured NPC. This study describes the development of a novel three-dimensional coculture model, which intends to mimic more closely the microenvironment of the hepatic sinusoid by respecting the specific plate structure of the liver parenchyma. The model could serve as a complex tool to study potential collaborations between PC and NPC of the liver.

References (0)

Cited by (100)

Search for the optimal genotoxicity assay for routine testing of chemicals: Sensitivity and specificity of conventional and new test systems
2022, Mutation Research - Genetic Toxicology and Environmental Mutagenesis
Citation Excerpt :
It is still (50 years later) used in routine screening with bacterial indicators and with many mammalian cell lines (e.g. CHO, CHL, V79, Caco-2, HeLa, TK6 and lymphocytes) [40]. In the early 1990s Natarajan and Darroudi [41,42] showed that the human-derived hepatoma line HepG2 retained the activities of xenobiotic drug metabolizing enzymes which are involved in the biotransformation of genotoxic carcinogens. They found that these cells can be used in MN experiments without addition of S9 mix and that they detect representatives of different groups of genotoxic carcinogens which require metabolic activation.
Many conventional in vitro tests that are currently widely used for routine screening of chemicals have a sensitivity/specificity in the range between 60 % and 80 % for the detection of carcinogens. Most procedures were developed 30–40 years ago. In the last decades several assays became available which are based on the use of metabolically competent cell lines, improvement of the cultivation conditions and development of new endpoints. Validation studies indicate that some of these models may be more reliable for the detection of genotoxicants (i.e. many of them have sensitivity and specificity values between 80 % and 95 %). Therefore, they could replace conventional tests in the future. The bone marrow micronucleus (MN) assay with rodents is at present the most widely used in vivo test. The majority of studies indicate that it detects only 5–6 out of 10 carcinogens while experiments with transgenic rodents and comet assays seem to have a higher predictive value and detect genotoxic carcinogens that are negative in MN experiments. Alternatives to rodent experiments could be MN experiments with hen eggs or their replacement by combinations of new in vitro tests. Examples for promising candidates are ToxTracker, TGx-DDI, multiplex flow cytometry, γH2AX experiments, measurement of p53 activation and MN experiments with metabolically competent human derived liver cells. However, the realization of multicentric collaborative validation studies is mandatory to identify the most reliable tests.
A microfluidically perfused three dimensional human liver model
2015, Biomaterials
Citation Excerpt :
However, these models do not allow investigations under humanized conditions. Other studies have shown that extracellular matrix (ECM) proteins such as collagen, fibronectin and laminin produced by endothelial cells promote hepatocyte differentiation [56] and preserve hepatocyte morphology concomitant with a stable secretion of albumin and urea, and an elevated hepatocyte drug metabolizing ability [57,58]. Moreover, hepatocyte growth factor (HGF), which is produced by LSEC and also HUVEC, was reported to mediate long-term survival and polarization of hepatocytes in co-culture with HUVEC [56,59–61].
Within the liver, non-parenchymal cells (NPCs) are critically involved in the regulation of hepatocyte polarization and maintenance of metabolic function. We here report the establishment of a liver organoid that integrates NPCs in a vascular layer composed of endothelial cells and tissue macrophages and a hepatic layer comprising stellate cells co-cultured with hepatocytes. The three-dimensional liver organoid is embedded in a microfluidically perfused biochip that enables sufficient nutrition supply and resembles morphological aspects of the human liver sinusoid. It utilizes a suspended membrane as a cell substrate mimicking the space of Disse. Luminescence-based sensor spots were integrated into the chip to allow online measurement of cellular oxygen consumption. Application of microfluidic flow induces defined expression of ZO-1, transferrin, ASGPR-1 along with an increased expression of MRP-2 transporter protein within the liver organoids. Moreover, perfusion was accompanied by an increased hepatobiliary secretion of 5(6)-carboxy-2′,7′-dichlorofluorescein and an enhanced formation of hepatocyte microvilli. From this we conclude that the perfused liver organoid shares relevant morphological and functional characteristics with the human liver and represents a new in vitro research tool to study human hepatocellular physiology at the cellular level under conditions close to the physiological situation.
The promise of organotypic hepatic and gastrointestinal models
2014, Trends in Biotechnology
Advances in the design and assembly of in vitro organotypic liver and gastrointestinal (GI) models can accelerate our understanding of metabolism, nutrient absorption, and the effect of microbial flora. Such models can provide comprehensive information on how of environmental toxins, drugs, and pharmaceuticals interact with and within these organs. Information obtained from such models could elucidate the complicated cascades of signaling mechanisms that occur in vivo. Because experiments on large-scale animal models are expensive and resource intensive, the design of organotypic models has renewed significance. The challenges and approaches to designing liver and GI models are similar. Because these organs are in close proximity and interact continually, we have described recent design considerations to guide future tissue models.
Controlled formation of heterotypic hepatic micro-organoids in anisotropic hydrogel microfibers for long-term preservation of liver-specific functions
2012, Biomaterials
Citation Excerpt :
Hollow fiber-based culture techniques have been proposed to form relatively large restiform organoids that are suitable for incorporation into BAL devices [7,8]. Heterotypic cell–cell communications have also been explored in in vitro culture with well-defined micro-regions, including patterned co-culture on planar substrates with stromal cells such as fibroblasts or endothelial cells [9–15], stacking of heterotypic cell sheets [16,17], and multilayer cell deposition [18–20], which result in significant enhancement of hepatocellular functions. Sandwich culture between collagen layers [21,22] and 3D culture in bioactive hydrogel matrices [23,24] has also been studied, clearly demonstrating that cell–matrix interactions are also critical.
We have developed a hydrogel-based cell cultivation platform for forming 3D restiform hepatic micro-organoids consisting of primary rat hepatocytes and feeder cells (Swiss 3T3 cells). Sodium alginate solutions containing hepatocytes/3T3 cells were continuously introduced into a microfluidic channel to produce cell-incorporating anisotropic Ba-alginate hydrogel microfibers, where hepatocytes at the center were closely sandwiched by 3T3 cells. Hydrogel fiber-based cultivation under high oxygen tension enabled the formation of heterotypic micro-organoids with a length of up to 1 mm and a diameter of ∼50 μm, mimicking the hepatic cord structures found in the liver, while maintaining a high hepatocyte viability (∼80%) over 30 days. Long-term observation of up to 90 days revealed a significant enhancement of hepatic functions because of heterotypic and homotypic cell–cell interactions, including albumin secretion and urea synthesis as well as expression of hepatocyte-specific genes, compared with conventional monolayer culture and single cultivation in the hydrogel fibers. The encapsulated hepatic constructs were recovered as scaffold-free micro-organoids by enzymatically digesting the hydrogel matrices using alginate lyase. This technique for creating heterotypic micro-organoids with precisely ordered multiple cell types will be useful for the development of a new liver tissue engineering approach and may be applicable to the fabrication of extracorporeal bioartificial liver (BAL) devices and assessment tools for drug development and testing.
Preserved liver-specific functions of hepatocytes in 3D co-culture with endothelial cell sheets
2012, Biomaterials
Hepatocyte-based tissue engineering is an attractive method that is being developed to treat liver diseases. However, this method is limited by the relatively short lifespan of cultured hepatocytes to maintain their normal function. For this reason, the present study was designed to develop a cell sheet-based hepatocyte co-culture system that enables cultured hepatocytes to preserve their functions for a longer period of time. To achieve this goal, a monolayer cell sheet composed of endothelial cells (EC) was placed on top of a monolayer of hepatocytes (Hep). In this hybrid cell sheet format, histological examination revealed that bile canaliculi networks were formed and well developed among the hepatocytes in the layered Hep-EC sheet group. The albumin secretion level was highly preserved at least for 28 days in the hybrid Hep-EC sheet, whereas the monolayer of hepatocytes exhibited a markedly reduced time course of secretion. The expression levels of hepatocyte-specific genes including albumin, hepatocyte nucleus factor 4 (HNF 4), multidrug resistance-associated protein 2 (MRP 2), and claudin-3 were significantly higher in the Hep-EC sheet compared to the Hep sheet alone after 14-days in culture. In all, this culture system provides a valuable technology to prolong hepatocyte functionality and enable more efficient development of liver tissue engineering approaches to create liver-targeted regenerative therapies.
Three-dimensional culture of hepatocytes on porcine liver tissue-derived extracellular matrix
2011, Biomaterials
There is currently no optimal system to expand and maintain the function of human adult hepatocytes in culture. Recent studies have demonstrated that specific tissue-derived extracellular matrix (ECM) can serve as a culture substrate and that cells tend to proliferate and differentiate best on ECM derived from their tissue of origin. The goal of this study was to investigate whether three-dimensional (3D) ECM derived from porcine liver can facilitate the growth and maintenance of physiological functions of liver cells. Optimized decellularization/oxidation procedures removed up to 93% of the cellular components from porcine liver tissue and preserved key molecular components in the ECM, including collagen-I, -III, and -IV, proteoglycans, glycosaminoglycans, fibronectin, elastin, and laminin. When HepG2 cells or human hepatocytes were seeded onto ECM discs, uniform multi-layer constructs of both cell types were formed. Dynamic culture conditions yielded better cellular infiltration into the ECM discs. Human hepatocytes cultured on ECM discs expressed significantly higher levels of albumin over a 21-day culture period compared to cells cultured in traditional polystyrene cultureware or in a collagen gel “sandwich”. The culture of hepatocytes on 3D liver-specific ECM resulted in considerably improved cell growth and maintained cell function; therefore, this system could potentially be used in liver tissue regeneration, drug discovery or toxicology studies.

View all citing articles on Scopus

¹: To whom correspondence and reprint requests should be addressed at Institute for General Pharmacology, Medical School of Hannover, Konstanty-Gutschow-Str. 8, 30625 Hannover, Germany.

View full text

Regular Article3-D Coculture of Hepatic Sinusoidal Cells with Primary Hepatocytes—Design of an Organotypical Model

Abstract

Regular Article
3-D Coculture of Hepatic Sinusoidal Cells with Primary Hepatocytes—Design of an Organotypical Model